DS21204 Rev. 16 - 3
1 of 3
www.diodes.com
2W005G - 2W10G
© Diodes Incorporated
NOT RECOMMENDE D
FOR NEW DESIGN 2W005G - 2W10G
2.0A GLASS PASSIVATED BRIDGE RECTIFIER
Features
• Glass Passivated Die Construction
• Low Forward Voltage Drop, High Current Capability
• Surge Overload Rating to 60A Peak
• Ideal for Printed Circuit Boards
• Case to Terminal Isolation Voltage 1500V
• UL Listed Under Recognized Component
Index, File Number E94661
• Lead Free Finish, RoHS Compliant (Date Code 0514+)
(Note 3)
Mechanical Data
• Case: WOG
• Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
• Terminals: Finish ⎯ Silver. Plated Leads Solderable per
MIL-STD-202, Method 208
• Polarity: As marked on Body
• Marking: Type Number
• Weight: 1.3 grams (approximate)
WOG
Dim Min Max
A 8.84 9.86
B 4.00 4.60
C 27.90 ⎯
D 25.40 ⎯
E 0.71 0.81
G 4.60 5.60
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol
2W
005G 2W
01G 2W
02G 2W
04G 2W
06G 2W
08G 2W
10G Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR 50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @ TA = 25°CI
O 2.0 A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
per element IFSM 60 A
Forward Voltage (per element) @ IF = 2.0A VFM 1.1 V
Peak Reverse Current @ TA = 25°C
at Rated DC Blocking Voltage @ TA = 125°CIRM 5.0
500 μA
Typical Total Capacitance (Note 2) CT 16 pF
Typical Thermal Resistance Junction to Case (Note 1) RθJC 40 °C/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Notes: 1. Thermal resistance from junction to case mounted on PC board with 13 x 13mm (0.03mm thick) land areas.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. EC Directive 2002/95/EC (RoHS) revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive An nex Notes 5 and 7.
A
B
D
E
G
G
C
+
+
DS21204 Rev. 16 - 3
2 of 3
www.diodes.com
2W005G - 2W10G
© Diodes Incorporated
NOT RECOMMENDE D
FOR NEW DESIGN
0
0.5
1.0
1.5
0 25 50 100 125 15075
I, AVE
R
A
G
E
R
E
C
T
I
F
IED
C
U
R
R
EN
T
(A)
O
T , AMBIENT TEMPERA TURE (°C)
Fig. 1 Forward Current Derating Curve
A
2.0
Single phase half-sine-wave
60Hz resistive or inductive load
0.01
0.1
1.0
10
0.2 0.6 1.0 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANT ANEOUS FORWARD VOLT AGE (V)
Fig. 2 Ty pi cal Forwar d Character is ti cs
F
0
10
20
30
40
50
110 100
I,
P
EAK
F
O
R
WA
R
D S
U
R
G
E
C
U
R
R
EN
T
(A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Max Non-Repetitive Surge Current
60
1
10
100
110100
C
,
T
O
T
AL
C
A
P
A
C
I
T
A
N
C
E (p
F
)
T
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Total Capacitance, Per Element
R
0.01
0.1
1.0
10
100
200
04080 160
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics
120
T = 100°C
j
T = 25°C
j
DS21204 Rev. 16 - 3
3 of 3
www.diodes.com
2W005G - 2W10G
© Diodes Incorporated
NOT RECOMMENDE D
FOR NEW DESIGN
Ordering Information (Note 4)
Device Packaging Shipping
2W005G WOG 1K Bulk
2W01G WOG 1K Bulk
2W02G WOG 1K Bulk
2W04G WOG 1K Bulk
2W06G WOG 1K Bulk
2W08G WOG 1K Bulk
2W10G WOG 1K Bulk
Notes: 4. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated p roducts for any unintended or una uthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign p atents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their pro ducts and an y
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
