MUR1100E
PRV : 1000 Volts
Io : 1.0 Amperes
FEATURES :
* Ultrafast 75 Nanoescond Recovery Time
* High Temperature
* Low Forward Voltage
* Low Leakage Current
* Pb / RoHS Free
MECHANICAL DATA
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.339 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at
25
°
C ambient temperature unless otherwise specified
.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL VALUE UNIT
Maximum Repetitive Peak Reverse Voltage VRRM 1000 V
Maximum Working Reverse Voltage VRWM 1000 V
Maximum DC Blocking Voltage VDC 1000 V
Maximum Average Forward Current IF(AV) 1.0 @ TA = 95 ºC A
Maximum Non-repetitive Peak Forward Surge Current IFSM 35 A
Maximum Instantaneous Forward Voltage at IF = 1 Amp. (Note 1) VF1.75 V
Maximum Instantaneous Reverse Current at IR10 ( TJ = 25 °C ) µA
Rated DC Blocking Voltage IR(H) 600 ( TJ = 100 °C ) µA
Maximum Reverse Recovery Time ( Note 2 ) Trr 75 ns
Junction Temperature Range TJ - 65 to + 175 °C
Storage Temperature Range TSTG - 65 to + 175 °C
Notes :
(
1
)
Pulse Test
:
Pulse Width
=
300
µ
s, Duty Cycle
≤
2
.
0
%
(2) Reverse Recovery Test Conditions : IF = 0.5A, IR = 1A ; Irr = 0.25 A
Page 1 of 2 Rev. 01 : September 1, 2005
RATING
ULTRAFAST RECTIFIERS
DO - 41
Dimensions in inches and ( millimeters )
1.00 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
0.205 (5.2)
0.166 (4.2)
1.00 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
RATING AND CHARACTERISTIC CURVES ( MUR1100E )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
+
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
FIG. 2 - DERATING CURVE FOR OUTPUT FIG. 3 - MAXIMUM NON-REPETITIVE PEAK
RECTIFIED CURRENT FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz
FIG. 4 - TYPICAL FORWARD CHARACTERISTICS
Page 2 of 2 Rev. 01 : September 1, 2005
1.0
0.75
0.5
0.25
1.25
40
0
50
0
30
20
10
10
1
PEAK FORWARD SURGE CURRENT,
AMPERES
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
FORWARD CURRENT, AMPERES
TJ = 25 °C
Pulse Width = 300 µs
2% Duty Cycle
0.1
0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4
FORWARD VOLTAGE, VOLTS
0.01
8.3ms SINGLE HALF SINE-WAVE
SET TIME BASE FOR 15 ns/cm
Trr
+ 0.5
0
- 0.25
- 1.0 A
1 cm
50 Vdc
(approx)
OSCILLOSCOPE
( NOTE 1 )
1 Ω
50 Ω10 Ω
D.U.T. PULSE
GENERATOR
( NOTE 2 )
RATED VR
RөJA = 50 ºC/W
SQUARE WAVE
